with Anchor Audio
Your AnchorLink wireless handheld microphone or belt pack has a one-time pairing feature where it will automatically connect to the speaker unit it was originially paired to. However, for those times when you need to unpair your mic, simply watch our instuctional video or follow these step-by-step instructions:
Un-Pair Wireless Microphones:
1. Start with the speaker On and the Mic Receiver in the Off position (Volume knob turned counter-clockwise until “click”). 2. Press and hold the Pairing button on the Mic Receiver.
3. While holding the Pairing button, turn on the Mic Receiver (Volume knob clockwise).
4. Continue to hold the Pairing button. Lights will appear in the order listed below. Process takes approximately 25 seconds:
• Mic 2 – Green blinking
• No Link – Red blinking
• Mic 1 – Green blinking
5. Once the No Link red light is solid, both Mics have been un-paired. 6. Repeat these steps for the 2nd Mic Receiver (if included).
NOTE: This process un-pairs both Mics from a Mic Receiver. The Mics are not needed to un-pair from the Mic Receiver.